Анализ эффективности эксплуатации приема-сдаточного пункта Лугинецкого нефтяного месторождения

Abstract

Объектом исследования являются: анализ эффективной эксплуатации приемо-сдаточного пункта нефти и СИКН №584. Цель работы: Выбор оптимальных решений по повышению эффективной эксплуатации приемо–сдаточного пункта нефти и СИКН №584 «Лугинецкого» нефтяного месторождения. В процессе исследования проводился: Анализ методов повышения эксплуатационных свойств ПСН и СИКН №584, расчет на эффективнуюпропускную способность ПСН и СИКН №584. Проведено экономическое обоснование выбора.

The object of the study are: analysis of the effective operation of acceptance points and oil SIKN № 584. Objective: The choice of optimal solutions to improve the efficient operation of acceptance points and oil SIKN №584 «Luginetskoe" oil field. The study was conducted: Analysis of operating properties and methods to increase the SPE SIKN 584, the calculation of the effective capacity of the SPE and SIKN №584. A feasibility study selection. Results: The paper shows the general geological characteristics of the deposit, and an assessment of the state of operation of acceptance points and SIKN №584. Considered technical and technological side of pumping oil from the process of acceptance points in the trunk pipeline "Igolsko - tall - Parabel '. Grounded methods used dynamic measurements and the indirect method of static measurements at acceptance point and SIKN 584, made a recommendation on the use of mass Coriolis flowmeter and densitometer. After analyzing the existing problem of increasing bandwidth SIKN №584 and propose measures to reduce the economic costs. Final qualifying work carried out in the word processor Microsoft Word, the graphic part is the Microsoft Corporation and is represented by the Microsoft Corporation Visio Point. Cost-effectiveness / value of the work: by adding additional measurement lines on SIKN 584, the volume of pumped oil increased by 2 times. That allows to pump faster daily volume of oil and reduce power consumption of pumps.