Методика разработки индуктора для устройства зачистки

Abstract

Methodology for inductor devices stripping. A device for Stripping insulation from the enamel, operating on the principle of induction heating copper wire in the gap of the hub of the magnetic flux, it is known [1] and produced in small batches. However, the effectiveness of its work on wires with a diameter less than 0.1 mm is low and the task of developing a device for Stripping wires of small diameter and Litz wire are still relevant. The aim of the research is the study of processes in a conductor of small diameter, also landratov in a magnetic field and on the basis of the obtained results, improving the device [1]. By "improvement", refers to the ability of the device to remove the enamel insulation from wires of diameter 0.08 or smaller, and the possibility of Stripping the insulation from landratov.