Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот ресурс: http://earchive.tpu.ru/handle/11683/57374
Полная запись метаданных
Поле DCЗначениеЯзык
dc.contributor.authorNikitenkov, Nikolai Nikolaevichen
dc.contributor.authorDauletkhanov, Erkhat Dauletkhanulyen
dc.contributor.authorTyurin, Yuri Ivanovichen
dc.contributor.authorZhang Leen
dc.contributor.authorSivin, Denis Olegovichen
dc.contributor.authorSypchenko, Vladimir Sergeevichen
dc.contributor.authorSyrtanov, Maksim Sergeevichen
dc.date.accessioned2020-01-20T09:42:32Z-
dc.date.available2020-01-20T09:42:32Z-
dc.date.issued2018-
dc.identifier.citationIntroduction of hydrogen into titanium by plasma methods / N. N. Nikitenkov [et al.] // Journal of Physics: Conference Series. — 2018. — Vol. 1115 : 6th International Congress "Energy Fluxes and Radiation Effects"14th International Conference on Modification of Materials with Particle Beams and Plasma Flows (14th CMM) : [proceedings], 16-22 September 2018, Tomsk, Russian Federation. — [032045, 7 p.].en
dc.identifier.urihttp://earchive.tpu.ru/handle/11683/57374-
dc.description.abstractThe introduction of hydrogen into titanium VT1-0 by the methods of plasma-immersion ion implantation (PIII) from the hydrogen plasma of a source with a heated cathode and into high-frequency discharge (HFD) plasma was studied. Modes of installations for introduction are chosen proceeding from the requirement of the maximum content of hydrogen in the samples. It is established that saturation from the HFD-plasma leads to a significant enrichment to a depth of 1.2 µm, at the introduction of hydrogen by the PIII this depth is 0.6 µm. The hydrogen content of 0.06 wt.% in the samples after saturation in the HFD plasma, and 0.049 wt.% after PIII. During PIIII (with an energy of 0.9-1.5 keV), hydrogen is strongly scattered by the surface of the sample and is captured predominantly by surface defects (including those created by the ions themselves), as well as by vacancies in the near-surface layers. Upon saturation from the HFD-plasma, hydrogen diffuses into the interior of the sample and settles in interstices and at grain boundaries. At the same time, saturation from the HFD plasma and PIII lead to significant change in the crystal parameters and the creation of hydride phases.en
dc.language.isoenen
dc.publisherIOP Publishingen
dc.rightsinfo:eu-repo/semantics/openAccessen
dc.subjectплазменно-иммерсионная ионная имплантацияru
dc.subjectвысокочастотный разрядru
dc.subjectводородru
dc.titleIntroduction of hydrogen into titanium by plasma methodsen
dc.typeConference Paperen
dc.typeinfo:eu-repo/semantics/publishedVersionen
dc.typeinfo:eu-repo/semantics/conferencePaperen
dcterms.audienceResearchesen
local.description.firstpage32045-
local.filepathhttps://doi.org/10.1088/1742-6596/1115/3/032045-
local.identifier.bibrecRU\TPU\network\28041-
local.identifier.perskeyRU\TPU\pers\30409-
local.identifier.perskeyRU\TPU\pers\29895-
local.identifier.perskeyRU\TPU\pers\34240-
local.identifier.perskeyRU\TPU\pers\33791-
local.identifier.perskeyRU\TPU\pers\34764-
local.localtypeДокладru
local.volume111561414-
local.conference.nameModification of Materials with Particle Beams and Plasma Flows-
local.conference.date2018-
dc.identifier.doi10.1088/1742-6596/1115/3/032045-
Располагается в коллекциях:Материалы конференций

Файлы этого ресурса:
Файл Описание РазмерФормат 
conf-nw-28041.pdf941,25 kBAdobe PDFПросмотреть/Открыть


Все ресурсы в архиве электронных ресурсов защищены авторским правом, все права сохранены.