Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот ресурс: http://earchive.tpu.ru/handle/11683/34863
Название: Composite materials based on high-modulus compounds for additive technology
Авторы: Grigoriev, Mikhail Vladimirovich
Kotelnikov, N.
Buyakova, Svetlana Petrovna
Kulkov, Sergey Nikolaevich
Ключевые слова: композиционные материалы; соединения; присадки; композиты; горячее прессование; физико-механические свойства; оксид алюминия
Дата публикации: 2016
Издатель: IOP Publishing
Библиографическое описание: Composite materials based on high-modulus compounds for additive technology / M. V. Grigoriev [et al.] // IOP Conference Series: Materials Science and Engineering. — 2016. — Vol. 140 : Interdisciplinary Problems in Additive Technologies : International Seminar, 16–17 December 2015, Tomsk, Russia : [proceedings]. — [012009, 11 p.].
Аннотация: The effect of adding nanocrystalline ZrO[2] and submicron TiC to ultrafine Al[2]O[3] on mechanical properties and the microstructure of the composites developed by hot pressing was investigated. It was shown that by means of hot pressing in argon atmosphere at the sintering temperature of 1500 °C one can obtain the composites of Al[2]O[3]-ZrO[2]-TiC with a fine structure and minimal porosity. It was shown that in the material a multi-scale hierarchical structure is formed, which possesses high physical and mechanical properties: the hardness and fracture toughness was 22 GPa and 5.2 MPa*m1/2, respectively. It has been shown that mechanical properties of the composite are better than those of commercial composites based on aluminum oxide (Al[2]O[3], ZTA, Al[2]O[3]-TiC) and are comparable to those of silicon nitride.
URI: http://earchive.tpu.ru/handle/11683/34863
Располагается в коллекциях:Материалы конференций

Файлы этого ресурса:
Файл Описание РазмерФормат 
dx.doi.org-10.1088-1757-899X-140-1-012009.pdf892,43 kBAdobe PDFПросмотреть/Открыть


Все ресурсы в архиве электронных ресурсов защищены авторским правом, все права сохранены.