Please use this identifier to cite or link to this item: http://earchive.tpu.ru/handle/11683/57120
Title: Графический метод выбора буровых долот
Other Titles: Graphic method of selecting drill bits
Authors: Попов, Анатолий Николаевич
Исмаков, Рустэм Адипович
Конесев, Геннадий Васильевич
Ишбаев, Гиният Гарифуллович
Popov, Anatoly Nikolaevich
Ismakov, Rustem Adipovich
Konesev, Gennady Vasilievich
Ishbaev, Giniyat Garifulovich
Keywords: интервал бурения долотом; прочность горных пород в кодах МАБП; твердость горных пород в категориях; номограмма; выбор типа долота в кодах МАБП; численная характеристика буримости; interval of drilling with bit; strength of formation in IADC codes; hardness of formation in categories; nomogram; selection of bit type in IADC codes; numerical characteristics of drillability of formation intervals
Issue Date: 2019
Publisher: Томский политехнический университет
Citation: Графический метод выбора буровых долот / А. Н. Попов [и др.] // Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов. — 2019. — Т. 330, № 11. — [С. 69-76].
Abstract: Актуальность исследования обусловлена необходимостью выбора перспективных буровых долот на стадии проектирования технологии бурения. Это направление является ресурсосберегающим, минимизирующим объем промысловых испытаний при поиске оптимальных технологических решений. Цель: разработать уточненную методику выбора буровых долот по статистическим данным о показателях механических свойств горных пород. Объекты: идентификация буровых долот различных фирм и их выбор в соответствии со статистическими характеристиками механических свойств горных пород. Эти вопросы слабо изучены и вызывают затруднения при проектировании режимов бурения скважин. Методы: графоаналитическое изучение соответствия типов буровых долот прочностным характеристикам горных пород, определяемым методом одноосного сжатия и методом статического вдавливания штампа с плоским основанием. Результаты. Для идентификации долот различных изготовителей Международная ассоциация буровых подрядчиков (МАБП) разработала единую классификацию в кодах МАБП. Для отечественной практики возникла дилемма: горные породы охарактеризованы твердостью горных пород по штампу и в категориях, а долота – прочностью горных пород при одноосном сжатии и в кодах МАБП. Предложен переход к показателю прочности горных пород, выраженному в кодах МАБП долота. Это обеспечивает единство характеристик как для долот, так и для горных пород. Соответственно предложены номограммы для выбора долот по статистическим величинам прочности горных пород в кодах МАБП, рассчитанных с надежностью 0,95. Показано, что можно аналогично выбирать долота и при представлении твердости горных пород в категориях. В случае лопастных алмазно-твердосплавных долот их выбор распадается на два этапа: выбор типа вооружения в соответствии с прочностью горной породы в кодах или твердостью в категориях и расчет числа лопастей долота, которое зависит как от прочностных характеристик горной породы, так и от диаметра долота. Для упрощения выбора долот предложено характеризовать буримость выделяемых интервалов бурения не словесно (мягкие, средние и т. д.), а их статистическими характеристиками в кодах МАБП или в категориях буримости с заданной вероятностью.
The relevance of the research is caused by the need to select promising drilling bits at the design stage of drilling technology. This direction is resource saving, minimizing the volume of field trials in the search for optimal technological solutions. The main aim of the research was to develop an improved method for selecting drilling bits from statistical data on the mechanical properties of formations. Objects: identification of drilling bits of different firms and their selection in accordance with the statistical characteristics of the mechanical properties of formations. These issues are poorly understood and cause difficulties in the design of well drilling regimes. Methods: graphoanalytical study of the correspondence of the types of drill bits to the strength characteristics of formations determined by Unconfined Compression Strength and the method of Static indentation of a stamp with a flat base. Results. The International Association of Drilling Contractors (IADC) has developed a single classification in IADC codes for identification of bits of various manufacturers. For domestic drillers a dilemma arose: formations are characterized by hardness according to the stamp and in categories, and the bits are made in accordance with the strength of the formations in the IADC codes. The authors pro- pose a transition to the index of formation strength, expressed in the codes of the IADC of bits. This ensures the uniformity of characteristics for both bits and rocks. Accordingly the authors proposed nomograms for selection of bits on statistical value of toughness of formations in codes IADC, calculated with reliability of 0,95. It is shown that it is possible to select bit similarly when representing hardness of formations in categories. In the case of blade diamond carbide bits, their choice is divided into two stages: the choice of the type of a bit in accordance with the strength of the formation in codes or with hardness in categories and the calculation of the number of blades of the bit, which depends both on the toughness characteristics of the formation, and on the diameter of the bit. To simplify the choice of bits, it was suggested to characterize the drillability of formations of the allocated intervals not verbally (soft, medium and so on), but by their statistical characteristics in IADC codes or in the categories with a given probability.
URI: http://earchive.tpu.ru/handle/11683/57120
ISSN: 2413-1830
Appears in Collections:Известия ТПУ

Files in This Item:
File Description SizeFormat 
bulletin_tpu-2019-v330-i11-07.pdf676,9 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.