Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот ресурс:
http://earchive.tpu.ru/handle/11683/74804
Название: | Oxidation and Mechanical Behavior of Cr-Coated Laser Beam Welds Made from E110 Zirconium Alloy |
Авторы: | Kashkarov, Egor Borisovich Gusev, Kirill Sergeevich Ashikhmin, Denis Aleksandrovich Abdulmenova, Anastasiya Vladimirovna Sidelev, Dmitry Vladimirovich |
Ключевые слова: | лазерная сварка; сплавы циркония; покрытия; окисление; магнетронное напыление; laser beam welding; zirconium alloys; chromium coating; high-temperature oxidation; magnetron sputtering; three-point bending test |
Дата публикации: | 2022 |
Издатель: | MDPI AG |
Библиографическое описание: | Oxidation and Mechanical Behavior of Cr-Coated Laser Beam Welds Made from E110 Zirconium Alloy / E. B. Kashkarov, K. S. Gusev, D. A. Ashikhmin [et al.] // Coatings. — 2022. — Vol. 12, iss. 11. — [1623, 10 p.]. |
Аннотация: | This article describes the oxidation resistance of laser beam welds made from E110 zirconium alloy with a chromium coating obtained using multi-cathode magnetron sputtering. Oxidation tests of the welded Zr alloy without and with Cr coating were performed in an air atmosphere at 1100 °C for 2–90 min. Then, analysis of their cross-section microstructure in different regions (weld, heat-affected, and bulk zones) was done using optical microscopy. Hardness measurements and three-point bending tests demonstrated the hardening of the Cr-coated welded Zr alloy after the oxidation that is discussed in the article. Brittle fracture behavior was observed for uncoated Zr weld even after a short period of high-temperature oxidation. |
URI: | http://earchive.tpu.ru/handle/11683/74804 |
Располагается в коллекциях: | Репринты научных публикаций |
Файлы этого ресурса:
Файл | Описание | Размер | Формат | |
---|---|---|---|---|
reprint-nw-39725.pdf | 2,9 MB | Adobe PDF | Просмотреть/Открыть |
Все ресурсы в архиве электронных ресурсов защищены авторским правом, все права сохранены.