Combined HF+MW CVD Approach for the Growth of Polycrystalline Diamond Films with Reduced Bow

Abstract

A combination of two methods of chemical vapor deposition (CVD) of diamond films, microwave plasma–assisted (MW CVD) and hot filament (HF CVD), was used for the growth of 100 µm-thick polycrystalline diamond (PCD) layers on Si substrates. The bow of HF CVD and MW CVD films showed opposite convex\concave trends; thus, the combined material allowed reducing the overall bow by a factor of 2–3. Using MW CVD for the growth of the initial 25 µm-thick PCD layer allowed achieving much higher thermal conductivity of the combined 110 µm-thick film at 210 W/m?K in comparison to 130 W/m?K for the 93 µm-thick pure HF CVD film.