Please use this identifier to cite or link to this item:
http://earchive.tpu.ru/handle/11683/33935
Title: | Cutting Edge Geometry Effect on Plastic Deformation of Titanium Alloy |
Authors: | Korovin, G. I. Filippov, Andrey Vladimirovich Proskokov, Andrey Vladimirovich Gorbatenko, Victoria Valerievna |
Keywords: | пластическая деформация; титановые сплавы; геометрические параметры; деформации; резание; механическая обработка |
Issue Date: | 2016 |
Publisher: | IOP Publishing |
Citation: | Cutting Edge Geometry Effect on Plastic Deformation of Titanium Alloy / G. I. Korovin [et al.] // IOP Conference Series: Materials Science and Engineering. — 2016. — Vol. 125 : Materials Treatment: Current Problems and Solutions : All-Russia Scientific and Practical Conference, 26–28 November 2015, Yurga, Russia : [proceedings]. — [012012, 6 p.]. |
Abstract: | The paper presents experimental studies of ОТ4 titanium alloy machining with cutting edges of various geometry parameters. Experiments were performed at a low speed by the scheme of free cutting. Intensity of plastic shear strain was set for defining of cutting edge geometry effect on machining. Images of chip formed are shown. Estimation of strain magnitude was accomplished with digital image correlation method. Effect of rake angle and cutting edge angle has been studied. Depth of deformed layer and the area of the plastic strain is determine. Results showed that increasing the angle of the cutting edge inclination results in a change the mechanism of chip formation. |
URI: | http://earchive.tpu.ru/handle/11683/33935 |
Appears in Collections: | Материалы конференций |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
dx.doi.org-10.1088-1757-899X-125-1-012012.pdf | 1,25 MB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.